TP-Link JetStream T3700G-52TQ - Show Switch

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
swtich unitid provision type
no switch unitid provision
Parameter
unitid —— The stack member number of the provisioned switch.
type —— The device type of the provisioned switch.
Command Mode
Global Configuration Mode
Example
Create a provisioned switch whose stack member number is 2 and device
type is T3700G-52TQRev1:
T3700G-52TQ(config)# switch 2 provision T3700G-52TQRev1
3.10 show switch
Description
The show switch command is used to display the current stack’s information.
Syntax
show switch [ unitid | detail | neighbors | stack-ports | stack-ports
counters | synchronization ]
Parameter
unitid —— Specify the member number.
detail —— Display the detailed information of the stack, including stack
member, stack port and neighboring information.
neighbors —— Display the information of the stack neighbor.
stack-ports —— Display the information of the stack ports.
stack-ports counters —— Display the statistic information of the stack
ports.
synchronization ——Display the synchronization information.
27