TP-Link JetStream T3700G-52TQ - Show Ip Ospf Area Interface

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
show ip ospf process-id area area-id database [ asbr-summary | network |
nssa-external | router | summary ]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id —— The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
asbr-summary | network | nssa-external | router | summary —— The LSA type.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the LSDB summary information of Area 0 in process 1:
T3700G-52TQ# show ip ospf 1 area 0 database
46.44 show ip ospf area interface
Description
The show ip ospf area interface command is used to display the interface
information of the specified area.
Syntax
show ip ospf process-id area area-id interface [ brief | interface-name
interface-number
]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id ——The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
brief—— Display the summary information of the interface.
interface-name interface-number —— Specify the interface name and
number to display the detailed information of this interface.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
429