TP-Link JetStream T3700G-52TQ - Ip Http Secure-Server Download Certificate

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
To cancel this limitation, please use no ip http secure-session maxsessions
command.
Syntax
ip http secure-session maxsessions num
no ip http secure-session maxsessions
Parameter
num —— The maximum number of the users logging on to the HTTP server,
ranging from 0 to 16. By default, the value is 16.
Command Mode
Global Configuration Mode
Example
Configure the maximum number of the users logging on to the HTTPS server
as 3:
T3700G-52TQ (config)# ip http secure-session maxsessions 3
20.11 ip http secure-server download certificate
Description
The ip http secure-server download certificate command is used to
download a certificate to the switch from TFTP server.
Syntax
ip http secure-server download certificate ssl-cert ip-address ip-addr
Parameter
ssl-cert —— The name of the SSL certificate which is selected to download
to the switch. The length of the name ranges from 1 to 25 characters. The
Certificate must be BASE64 encoded.
ip-addr —— The IP address of the TFTP server. Both IPv4 and IPv6 addresses
are supported, for example 192.168.0.1 or fe80::1234.
Command Mode
Global Configuration Mode
126