TP-Link JetStream T3700G-52TQ - Ip Ospf Retransmit-Interval; Ip Ospf Transmit-Delay

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
46.24 ip ospf retransmit-interval
Description
The ip ospf retransmit-interval command is used to configure the interval to
retransmit the LSA, DD and LSR packets on the specified interface. To
restore to default value, please use the no ip ospf retransmit-interval
command.
Syntax
ip ospf retransmit-interval interval
no ip ospf retransmit-interval
Parameter
interval —— The retransmit interval, ranging from 1 to 65535 seconds. The
default value is 5 seconds.
Command Mode
Interface Configuration Mode
Example
Configure the retransmission interval of interface VLAN 2 as 10 seconds:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip ospf retransmit-interval 10
46.25 ip ospf transmit-delay
Description
The ip ospf transmit-delay is used to configure the transmission delay of
LSA on the specified interface. To restore to default value, please use the no
ip ospf transmit-delay.
Syntax
ip ospf transmit-delay delay
no ip ospf transmit-delay
417