TP-Link JetStream T3700G-52TQ - Show Interface Status; Show Interface Counters

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Clear the statistic information of all Ethernet ports:
T3700G-52TQ(config)#clear counters
Clear the statistic information of port 1/0/3:
T3700G-52TQ(config)#clear counters interface gigabitEthernet 1/0/3
23.14 show interface status
Description
The show interface status command is used to display the
connective-status of an Ethernet port.
Syntax
show interface status [ gigabitEthernet port | ten-gigabitEthernet port |
port-channel
lagid ]
Parameter
port ——The port number or port list.
lagid —— The ID of LAG.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the connective-status of all Ethernet ports:
T3700G-52TQ(config)#show interface status
Display the connective-status of Gigabit Ethernet port 1:
T3700G-52TQ(config)#show interface status gigabitEthernet 1/0/1
23.15 show interface counters
Description
The show interface counters command is used to display the statistic
information of an Ethernet port.
171