JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 25 Differentiated Services Commands
Differentiated Services (DiffServ) allows traffic to be classified into streams and given certain
QoS treatment in accordance with defined per-hop behaviors. Packets are classified and
processed based on defined criteria. The classification criteria is defined by a class. The
processing is defined by a policy's attributes. Policy attributes may be defined on a per-class
instance basis, and it is these attributes that are applied when a match occurs. A policy can
contain multiples classes. When the policy is active, the actions taken depend on which class
matches the packet.
25.1 diffserv
Description
The diffserv command is used to enable the administrative mode of
Differentiated Services (DiffServ) function. To disable the administrative
mode of Differentiated Services (DiffServ) function, please use no diffserv
command.
Syntax
diffserv
no diffserv
Command Mode
Global Configuration Mode
Example
Enable the administrative mode of Differentiated Services (DiffServ) function:
T3700G-52TQ(config)# diffserv
25.2 class-map
Description
The class-map command is used to enter the Class-Map Config mode for an
existing DiffServ class.
Syntax
class-map
class-map-name
183
To Next Page
Loading...
