JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Display the NTP mode configuration information of the switch:
T3700G-52TQ#show system-time ntp
22.28 show system-info
Description
The show system-info command is used to display system description,
system name, device location, system contact, hardware version, firmware
version, system time, run time and so on.
Syntax
show system-info
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the system information:
T3700G-52TQ#show system-info
22.29 show environment
Description
The show environment command is used to display system description,
system name, device location, system contact, hardware version, firmware
version, system time, run time and so on.
Syntax
show environment{ all | fan | power | temperature } [
unitid
]
Parameter
all | fan | power | temperature
—— Specify the system’s running
environmental status to be displayed. “all” represents all the environmental
information; “fan” represents the fans’ running status; “power” represents the
power’s running status; “temperature” represents the system’s
environmental temperature.
156
To Next Page
Loading...
