TP-Link JetStream T3700G-52TQ - Management-Port Ipv6 Address Eui-64; Management-Port Ipv6 Gateway

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
51.6 management-port ipv6 address eui-64
Description
This management-port ipv6 address ipv6-addr eui-64 command is used to
manually configure a global IPv6 address with an extended unique identifier
(EUI) in the low-order 64 bits on the management port. Specify only the
network prefix. The last 64 bits are automatically computed from the switch
MAC address. To remove an EUI-64 IPv6 address from the management port,
please use the no management-port ipv6 address eui-64 command.
Syntax
management-port ipv6 address ipv6-addr eui-64
no management-port ipv6 address
ipv6-addr eui-64
Parameter
ipv6-addr —— Global IPv6 address with 64 bits network prefix, for example
3ffe::/64.
Configuration Mode
Global Configuration Mode
Example
Configure an EUI-64 global IPv6 address on the management port with the
network prefix 3ffe::/64:
T3700G-52TQ(config)# ipv6 address 3ffe::/64 eui-64
51.7 management-port ipv6 gateway
Description
This management-port ipv6 gateway command is used to configure the
ipv6 gateway address of the management port. To remove the IPv6 gateway
address from the management port, please use the no management-port
ipv6 gateway command.
Syntax
management-port ipv6 gateway ipv6-addr
no management-port ipv6 gateway
462