TP-Link JetStream T3700G-52TQ - Access-List Create; Mac Access-List

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)#time-range tSeg1
T3700G-52TQ(config-time-range)#periodic week-date weekend time-slice
08:30-12:00
29.4 access-list create
Description
The access-list create command is used to create standard-IP ACL and
extend-IP ACL.
Syntax
access-list create acl-id
Parameter
acl-id —— ACL ID, ranging from 1 to 199. 1-99 must be Standard-IP ACL, and
100-199 must be Extend-IP ACL.
Command Mode
Global Configuration Mode
Example
Create a standard-IP ACL whose ID is 12:
T3700G-52TQ(config)#access-list create 12
29.5 mac access-list
Description
The mac access-list command is used to create MAC ACL. To set the
detailed configurations for a specified MAC ACL, please use mac access-list
command to access Mac Access-list Configuration Mode. To delete the MAC
ACL, please use no mac access-list.
Syntax
mac access-list name
no mac access-list
name
Parameter
name —— The name of MAC ACL, which may include alphabetic, numeric,
dash, dot or underscore characters only and must start with a letter and the
size of the name string must be less than or equal to 31 characters.
224