JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
start-date
—— The start date in Absoluteness Mode, in the format of
MM/DD/YYYY. By default, it is 01/01/1970.
end-date
—— The end date in Absoluteness Mode, in the format of
MM/DD/YYYY. By default, it is 12/31/2099. The Absoluteness Mode will be
disabled if the start date and end date are both in default value.
Command Mode
Time-range Configuration Mode
Example
Configure the time-range tSeg1 with time from May 5, 2012 to Oct. 5, 2012:
T3700G-52TQ(config)# time-range tSeg1
T3700G-52TQ(config-time-range)# absolute start 05/05/2012 end
10/05/2012
29.3 periodic
Description
The periodic command is used to configure the time-range into periodic
mode. To delete the corresponding Periodic Mode time-range, please use no
periodic command. To delete the corresponding Periodic Mode week-date
time-range, please use no periodic week-date command.
Syntax
periodic [week-date
week-day
] [time-slice
time-slice
]
no periodic week-date
Parameter
week-day
—— Periodic Mode, in the format of 1-3,6 or daily, weekend,
weekdays. 1-3, 6 represent Monday, Tuesday, Wednesday and Saturday;
daily represents every day; weekend represents weekend and weekdays
represents working day. By default, the Periodic Mode is disabled.
time-slice
—— Create the time-slice, in the format of HH:MM-HH:MM.
Command Mode
Time-range Configuration Mode
Example
Configure the time-range tSeg1 with time from 8:30 to 12:00 at weekend:
223
To Next Page
Loading...
