TP-Link JetStream T3700G-52TQ - Show Ip Dhcp Relay

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
ip dhcp relay information remote-id remoteID
no ip dhcp relay information remote-id
Parameter
remoteID —— Specify the remote ID, ranging from 1 to 32 characters.
Command Mode
Global Configuration Mode
Example
Specify the remote ID as “tplink”:
T3700G-52TQ(config)# ip dhcp relay information remote-id tplink
39.7 show ip dhcp relay
Description
The show ip dhcp relay command is used to display the configuration of
DHCP Relay.
Syntax
show ip dhcp relay
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of DHCP Relay:
T3700G-52TQ(config)# show ip dhcp relay
348