JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
41.18 show ip igmp profile
Description
The show ip igmp profile command is used to display the configuration
information of all the profiles or a specific profile.
Syntax
show ip igmp profile [
id
]
Parameter
id
—— Specify the ID of the profile.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of all profiles:
T3700G-52TQ(config)# show ip igmp profile
41.19 show ip igmp groups
Description
The show ip igmp groups command is used to display the information of all
the dynamic multicast groups or the specified multicast group.
Syntax
show ip igmp groups [
group-address
] [ detail ]
Parameter
group-address
—— Specify the multicast group address.
detail —— The detailed information of the dynamic multicast groups.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of all the dynamic multicast groups:
T3700G-52TQ(config)# show ip igmp groups
362
To Next Page
Loading...
