TP-Link JetStream T3700G-52TQ - Ip Dhcp Server Ping Packets; Network

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
pool-name —— Specify the address pool name, ranging from 1 to 8
characters.
Command Mode
Global Configuration Mode
Example
Create the address pool of name POOL1:
T3700G-52TQ(config)# ip dhcp server pool POOL1
38.8 ip dhcp server ping packets
Description
The ip dhcp server ping packets command is used to specify the number of
PING packets sent. If this value is set to 0, the PING process will be disabled.
To resume the default value, please use no ip dhcp server ping packets
command.
Syntax
ip dhcp server ping packets num
Parameter
num —— Specify the PING packets’ number, ranging from 0 to 10. By default
it’s 1.
Command Mode
Global Configuration Mode
Example
Specify the PING packets’ number as 2:
T3700G-52TQ(config)# ip dhcp server ping packets 2
38.9 network
Description
The network command is used to specify the address and subnet of the
network pool.
332