TP-Link JetStream T3700G-52TQ - Address Hardware-Address

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
lease
{
days [hours [minutes] ] | infinite
}
Parameter
days ——Specify the days parameter of lease time, ranging from 0 to 59
days.
hours ——Specify the hours parameter of lease time, ranging from 0 to 23
hours.
minutes ——Specify the minutes parameter of lease time, ranging from 0 to
59 minutes.
infinite ——Specify the lease time as infinite.
Command Mode
DHCP Configuration Mode
Example
Specify the lease time of address pool “product” as 10 minutes:
T3700G-52TQ(config)# ip dhcp server pool product
T3700G-52TQ(config-dhcp)# lease 0 0 10
38.12 address hardware-address
Description
The address hardware-address command is used to reserve the static
address bound with hardware address in the address pool. To delete the
binding, please use no address.
Syntax
address ip-address mask hardware-address hardware-address
hardware-type
{ ethernet | ieee802 }
no address ip-address
Parameter
ip-address —— Specify the static binding IP address.
mask —— Specify the static binding IP address mask.
hardware-address —— Specify the hardware address, in the format
XX:XX:XX:XX:XX:XX.
ethernet | ieee802 —— Specify the hardware type.
334