TP-Link JetStream T3700G-52TQ - Show Mac Address-Table Vlan

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
show mac address-table address mac-addr [ interface { fastEthernet port
| gigabitEthernet port | ten-gigabitEthernet port } ] [ vid vlan-id ]
Parameter
mac-addr —— The specified MAC address.
port —— The Fast/Gigabit/ten-Gigabit Ethernet port number.
vlan- id —— Specify the VLAN which the entry belongs to.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the MAC address 00:00:00:23:00:00 in VLAN 1:
T3700G-52TQ(config)#show mac address-table address 00:00:00:23:00:00
vid 1
Display the information of the MAC address 00:00:00:23:00:00:
T3700G-52TQ(config)#show mac address-table address 00:00:00:23:00:00
Display the information of the MAC address 00:00:00:23:00:00 on port
1/0/20:
T3700G-52TQ(config)#show mac address-table address 00:00:00:23:00:00
interface gigabitEthernet 1/0/20
21.11 show mac address-table vlan
Description
The show mac address-table vlan command is used to display the MAC
address configuration of the specified vlan.
Syntax
show mac address-table vlan vid
Parameter
vid —— The specified VLAN id.
136