JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Show the commands you have entered in the current mode:
T3700G-52TQ(config)# show history
1 show history
2.9 clear history
Description
The clear history command is used to clear the commands you have entered
in the current mode, therefore these commands will not be shown next time
you use the clear history command.
Syntax
clear history
Command Mode
Privileged EXEC Mode and any Configuration Mode
Example
Clear the commands you have entered in the current mode:
T3700G-52TQ(config)# clear history
21
To Next Page
Loading...
