TP-Link JetStream T3700G-52TQ - Bootfile; Show Ip Dhcp Server Conflictlogging

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Example
Specify the DHCP client’s domain name as edu:
T3700G-52TQ(config)# ip dhcp server pool product
T3700G-52TQ(config-dhcp)# domain-name edu
38.21 bootfile
Description
The bootfilecommand is used to specify the name of the DHCP client’s
bootfile. To delete the bootfile, please use no bootfile command.
Syntax
bootfile file-name
no bootfile
Parameter
file-name —— Specify the name of the DHCP client’s bootfile.
Command Mode
DHCP Configuration Mode
Example
Specify the name of the DHCP client’s bootfile as boot1:
T3700G-52TQ(config)# ip dhcp server pool product
T3700G-52TQ(config-dhcp)# bootfile boot1
38.22 show ip dhcp server conflictLogging
Description
The show ip dhcp server conflictLogging command is used to display
address conflicts logged by the DHCP Server. If no IP address is specified, all
the conflicting addresses are displayed.
Syntax
show ip dhcp server conflictLogging [ ip ip-address ]
Parameter
ip-address —— Specify the conflict IP address.
340