JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
33.8 mvr immediate
Description
The mvr immediate command is used to enable MVR immediate leave mode.
To disable MVR immediate leave mode, please use no mvr immediate
command.
Syntax
mvr immediate
no mvr immediate
Command Mode
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet/
interface ten-gigabitEthernet / interface range ten-gigabitEthernet)
Example
Enable MVR immediate leave mode for Gigabit Ethernet port 23:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/23
T3700G-52TQ(config)#mvr immediate
33.9 show mvr
Description
The show mvr command is used to display the global configuration of MVR.
Syntax
show mvr
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of MVR:
T3700G-52TQ#show mvr
285
To Next Page
Loading...
