JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
authentication method list, please use the no aaa authentication login
command.
Syntax
aaa authentication login {
method-list
} {
method1
} [
method2
] [
method3
]
[
method4
]
no authentication login
method-list
Parameter
method-list
—— Specify the method list name. The preset method lists
include defaultList, networkList, noauthList and httpList.
method1, method2, method3, method4
—— Specify the authentication
methods in order. The next authentication method is tried only if the previous
method does not respond, not if it fails.
The preset methods include radius, tacacs, line, local, enable and none.
“radius” means using the RADIUS server to authenticate the users; “tacacs”
means using the TACACS+ server to authenticate the users; “line” means
using the locally configured Line password to authenticate the users. “local”
means using the local username database to authenticate the users; “enable”
means using the locally configured Enable password to authenticate the
users. “none” means no authentication is used for login.
Command Mode
Global Configuration Mode
User Guidelines
By default the login authentication method list is “default” with “local” as
method1.
Example
Configure a login authentication method list “defaultList” with the priority1
method as radius and priority2 method as local:
T3700G-52TQ(config)# aaa authenticaiton login defaultList radius local
48.6 aaa authentication enable
Description
This aaa authentication enable command is used to configure a privilege
authentication method list. A method list describes the authentication
437
To Next Page
Loading...
