TP-Link JetStream T3700G-52TQ - Chapter 9 Private VLAN Commands; Private-Vlan Primary; Private-Vlan Community

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Chapter 9 Private VLAN Commands
Private VLANs are configured specially for saving VLAN resource of uplink devices and
decreasing broadcast.
9.1 private-vlan primary
Description
The private-vlan primary command is used to configure the designated
VLAN as the primary VLAN of the Private VLAN. To remove the primary VLAN
property pf the current VLAN, please use no private-vlan primary command.
Syntax
private-vlan primary
no private-vlan primary
Command Mode
VLAN Configuration Mode (VLAN)
Example
Configure the VLAN 3 as the primary VLAN of the private VLAN:
T3700G-52TQ(config)#vlan 3
T3700G-52TQ(config-vlan)#private-vlan primary
9.2 private-vlan community
Description
The private-vlan community command is used to configure the designated
VLAN as the community VLAN of the Private VLAN. To remove the
community VLAN property pf the current VLAN, please use no private-vlan
community command.
Syntax
private-vlan community
no private-vlan community
51