TP-Link JetStream T3700G-52TQ - Clear Ip Ospf; Show Ip Ospf

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Interface Configuration Mode
Example
Configure interface VLAN 2 to ignore the MTU field check in the DD exchange
process:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip ospf mtu-ignore
46.35 clear ip ospf
Description
The clear ip ospf command is used to reset the OSPF process, which will
clear all the dynamic information. The clear ip ospf process command will
reset all the OSPF processes.
Syntax
clear ip ospf [ process-id ]
clear ip ospf process
Parameter
process-id —— The process ID, ranging from 1 to 65535.
Command Mode
Privileged EXEC Mode
Example
Reset all the OSPF processes:
T3700G-52TQ# clear ip ospf process
46.36 show ip ospf
Description
The show ip ospf is used to display the global information of the OSPF
process.
424