TP-Link JetStream T3700G-52TQ - Next-Server; Domain-Name

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
38.19 next-server
Description
The next-server command is used to specify the next DHCP server’s
address during the DHCP boot process. To delete the next server, please use
no next-server command.
Syntax
next-server ip-address
next-server
Parameter
ip-address —— Specify the IP address of the next server.
Command Mode
DHCP Configuration Mode
Example
Specify the next server’s IP address as 192.168.2.1:
T3700G-52TQ(config)# ip dhcp server pool product
T3700G-52TQ(config-dhcp)# next-server 192.168.2.1
38.20 domain-name
Description
The domain-name command is used to specify the domain name for the
DHCP client. To delete the domain name, please use no domain-name
command.
Syntax
domain-name domainname
no domain-name
Parameter
domainname —— Specify the domain name for the DHCP client.
Command Mode
DHCP Configuration Mode
339