TP-Link JetStream T3700G-52TQ - Ip Http Session Maxsessions; Ip Http Session Hard-Timeout

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
20.2 ip http session maxsessions
Description
The ip http session maxsessions command is used to configure the
maximum number of users that are allowed to connect to the HTTP server. To
cancel this limitation, please use no ip http session maxsessions command.
Syntax
ip http session maxsessions num
no ip http session maxsessions
Parameter
num —— The maximum number of the users logging on to the HTTP server,
ranging from 0 to 16. By default, the value is 16.
Command Mode
Global Configuration Mode
Example
Configure the maximum number of the users logging on to the HTTP server
as 3:
T3700G-52TQ (config)# ip http session maxsessions 3
20.3 ip http session hard-timeout
Description
The ip http session hard-timeout command is used to configure the
hard-timeout of the HTTP server. To restore to the default hard-timeout time,
please use no ip http session hard-timeout command.
Syntax
ip http session hard-timeout time
no ip http session hard-timeout
Parameter
time ——The hard-timeout time, ranging from 1 to 168 in hours. By default,
the value is 24.
121