5 Connectivity settings GPS receiver settings
AgRemote Interface
Note – Only advanced users should use the AgRemote interface.
The FM-1000 integrated display has an on-screen AgRemote interface for manually adjusting GPS
receiver settings.
To access the on-screen AgRemote interface:
1.
At the Configuration screen, tap GPS Receiver and then tap Diagnostics. The GPS Status
screen displays.
2. Tap AgRemote. The on-screen AgRemote interface displays.
For more information on the correct use of the AgRemote interface, refer to the AgRemote Software
Guide for AgGPS Receivers on www.trimble.com.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 109
To Next Page
Loading...