Trimble FM-1000 - Field-IQ 12-section switch box (optional); Material assignment

Field-IQ operation 18 Operations
Field-IQ 12-section switch box (optional)
Only one section switch box can be used on each system.
Each section switch is automatically assigned to the
corresponding section. The sections are read from left to
right. For example, switch 1 assigns to the section furthest on the left when standing behind the
implement. For more information, see the Hardware tab in Setup screen of Field-IQ.
The section switches have different functions, depending upon the status of the master
Automatic/Manual section control switch on the master switch box.
Automatic section control
When the Automatic/Manual section control switch is in the Automatic position, if the section switch
is in the:
l On/up position: The section(s) assigned to it are commanded automatically by the FM-1000
integrated display.
l Off/down position: The section(s) assigned to it are commanded to be off.
Manual section control
When the Automatic/Manual section control switch is in the Manual position, if the section switch
is in the:
l On/up position:The section(s) assigned to it are commanded to be on. This overrides the
display and coverage logging is ignored.
l Off/down position:The section(s) assigned to it are commanded to be off. This overrides the
display and coverage logging is ignored.
LEDstatus indicators
The LED indicators on the section switch box are:
l Green: Unit is powered and is communicating with the display.
l Yellow: Unit is initializing communications with the display.
l Red:Unit is powered but not communicating with the display.
Material assignment
To change materials quickly and easily:
1. At the Material Assignment screen, tap the material to change. A list of available materials
displays.
392 FM-1000 Integrated Display User Guide Version 9.25, Revision B