Trimble FM-1000 - Upgrade Field-IQ system firmware; Upgrade steps

Upgrade Field-IQ system firmware 9 Field-IQ system setup
Upgrade Field-IQ system firmware
You can use the display to upgrade the Field-IQ system firmware components:
l Master Switch Box
l 12 Section Switch Box
l Rate and Section Control Module
l Seed Monitoring Module
l Section Control Module
l Rate Control Module
l Rawson Control Module
Upgrade steps
To upgrade a component’s firmware:
1. Transfer the new firmware file from www.trimble.com to your office computer.
2. Connect a USB drive to your office computer.
3. Copy the firmware upgrade file to the Firmware folder on the USB drive.
4. Insert the USB drive into a USB socket on the display.
5. Press the power button on the rear of the display to turn on the display. Wait for the Home
screen to display.
6.
Tap Upgrade. The Firmware Upgrade screen displays.
7. Tap the appropriate hardware on the Hardware list.
8. Tap the appropriate feature from the Firmware list. Any available firmware upgrade files display
in the upper right list.
9. Tap the appropriate firmware file. The display shows the upgrade progress.
10. After the upgrade is complete, tap OK. The system restarts. The component’s firmware is now
updated.
242 FM-1000 Integrated Display User Guide Version 9.25, Revision B