Optional features/plugins 2 Display basics
Optional features/plugins
The FM-1000 integrated display has a number of optional features (plugins) you can install to
expand its functionality. Most of these features require additional hardware. You must:
1. Purchase the feature.
2. Install any hardware required by the feature.
3. Unlock the feature. See Unlock features / plugins (page 45).
4. Activate the feature for use. See Activate features/plugins for use (page 47).
5. Configure the feature.
Vehicle guidance
l Trimble Autopilot™ automated steering system: See Autopilot system (page 166).
l Trimble EZ-Pilot™ assisted steering system: See EZ-Pilot assisted steering system (page 191).
l Trimble EZ-Steer® assisted steering system:See EZ-Steer assisted steering system (page 199).
l RG-100 Row Guidance system:Works with the Autopilot system to center the combine on the
rows. See Row Guidance (page 188).
Features for application
l Trimble Field-IQ™ crop input control system:Control sections and vary application rates. See
Field-IQ system setup (page 210) and Field-IQ operation (page 385).
l GreenSeeker®: Vary fertilizer rate in real-time using crop vigor measurements. See GreenSeeker
functionality (page 244) and GreenSeeker operation (page 407).
l Serial Rate Controller: Use a variable rate controller. See Additional controller setup (page 265).
ISOBUS
l Virtual Terminal: View and use Virtual Terminal. See Virtual Terminal setup (page 250) and
Virtual Terminal operation (page 413).
l Task Controller: Use Task Controller. See Task Controller setup (page 251) and Task Controller
operation (page 412).
40 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...