Trimble FM-1000 - Remote Output setup

Remote Output setup 5 Connectivity settings
Remote Output setup
When remote output is activated, the FM-1000 integrated display sends pulses to an external
device. For example, you can use a remote output signal to control a tree planter.
To set up Remote Output:
1. Install Remote Output. See Activate features/plugins for use (page 47).
2. Set up Remote Output. See Remote Output settings (page 131).
3. Calibrate the lead time. See Calibrate implement lead time (page 133).
130 FM-1000 Integrated Display User Guide Version 9.25, Revision B