Trimble FM-1000 - Geometry

Edit implement settings 7 Implement setup
Geometry
Setting Explanation
Type Select the type of connection to the implement.
Hitch to Ground Contact Point For True Guide: Measure from the tractor hitch pin to the
point the implement touches the soil (the implement
pivot point). For planters this is typically the seeding units
or the midpoint of several rows of tools on the
implement.
Note –
If NOT using the
TrueGuide system (page 268)
,
shortening this setting causes the implement to come onto the
guidance line more quickly while lengthening the setting causes
the implement to come onto the guidance line more slowly.
158 FM-1000 Integrated Display User Guide Version 9.25, Revision B