Trimble FM-1000 - Implement control; Connectivity; Water Management; Harvest

2 Display basics Optional features/plugins
Implement control
l Trimble TrueGuide™ implement guidance system: Use guidance on the implement for greater
accuracy. See TrueGuide system (page 268) and TrueGuide operation (page 426).
l Trimble TrueTracker™ implement steering system: Automatically steer the implement for
greater accuracy. See TrueTracker (page 274) and TrueTracker operation (page 423).
Connectivity
l Ag3000 modem:Receive cellular RTKcorrections. See Ag3000 modem (page 137).
l DCM-300 modem: Receive RTKcorrections from a VRS
™
network, a third-party RTK provider or
a CORS. See DCM-300 Modem (page 138).
l Vehicle Sync:Transmit data between vehicles. See Vehicle Sync (page 292).
l Serial Data Input:Enable data input from an external serial device. See Serial Data Input (page
136).
l Remote Output: Enable remote data output to an external device. See Remote Output setup
(page 130).
l EZ-Remote™ Joystick: Control a variety of display functions remotely. See EZ-Remote Joystick
(page 53).
Water Management
l Survey and design: Survey a field and then create a design. See Survey the field (page 433) and
Create / save a design (page 435).
l FieldLevel™ II:
ll Level the field to a design, install subsurface drainage or surface ditches. See FieldLevel II
Leveling (page 300).
l Control leveling with two GPS receivers, in one of two possible scraper configurations. See
Tandem / dual scraper setup (page 307), Dual scraper controls (page 449), and Tandem
scraper controls (page 450).
l WM-Drain® farm drainage solution: For subsurface drainage. See WM-Drain setup (page 311)
and WM-Drain operation (page 451).
Harvest
l Yield Monitoring: Display yield monitoring data. See Yield Monitoring settings (page 328) and
Yield Monitoring operation (page 470).
Version 9.25, Revision B FM-1000 Integrated Display User Guide 41