14 TrueTracker setup Setup process
Requirements
TrueTracker requires:
l An Autopilot system
l An unlock code
l AG-815 integrated radio with secondary receiver
l Second antenna
l
Platform kit for the implement actuation type
l
Implement NavController and cabling
For information on TrueTracker cabling, see FM-1000 Integrated Display Cabling Guide.
For operation information, see TrueTracker operation (page 423).
Setup process
To set up the TrueTracker system:
1. Activate TrueTracker. See Activate features/plugins for use (page 47).
2. Complete the implement controller settings. See Implement controller setup for TrueTracker
system (page 276).
3. Set up the implement so that the system can tell:
ll Which type of implement is attached
l How much area it covers
l How far it is offset
Make sure you are measuring the offsets from the antenna to the ground working point of the
implement. See Implement setup (page 152).
Note – When you enter the number of implement sections, if the implement does not have sections,
enter
1
.
4. If necessary, edit the vehicle profile. See Vehicle settings for Autopilot system (page 167).
5. Calibrate the implement. See Implement calibration for TrueTracker system (page 281).
Version 9.25, Revision B FM-1000 Integrated Display User Guide 275
To Next Page
Loading...