Trimble FM-1000 - GPS output settings

5 Connectivity settings GPSoutput settings
GPSoutput settings
To access the GPSOutput Settings screen:
1.
At the Configuration screen, tap GPS Receiver, then tap Setup. The GPSReceiver Settings
screen displays.
2.
On the Settings tab, tap GPSOutput. The GPSOutput Settings screen displays. There are three
tabs available:
ll CANGPS messages (page 128)
l NMEA messages (page 128)
l Serial NMEA messages (page 126)
Version 9.25, Revision B FM-1000 Integrated Display User Guide 125