18 Operations EZ-Steer system operation
Disengage EZ-Steer system
The EZ-Steer system can be disengaged automatically and manually.
Automatic disengagement
The EZ-Steer system disengages automatically when:
l The vehicle is outside the engage distance set up in the Engage tab. See Engage settings for EZ-
Steer (page 201).
l The system is paused.
l GPS positions are lost.
l The Minimum Fix Quality setting is set to a high accuracy correction method and the system receives
low accuracy positions (such as no corrections).
Manual disengagement
To manually disengage the system, you can:
l
Tap (green) on the screen.
l Press the Engage button on the optional remote control.
l
Turn the steering wheel to override the electric motor.
When you turn the steering wheel manually, the EZ-Steer system disengages. It is
recommended that you check this setting before you begin using the system in a new
installation. To do so:
a. Engage on a line.
b. Turn the wheel until EZ-Pilot disengages.
To make adjustments to the amount of force required to disengage the system using the
steering wheel, see Steering performance calibration (page 196).
When the system is not in use, hinge the motor away from the steering wheel and then secure it
with the lock pin.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 405
To Next Page
Loading...