Trimble FM-1000 - Sounds

3 Basic settings Basic system settings
Sounds
The ways sounds can be produced are:
l Through the internal speaker of the FM-1000 integrated display
l
If Autopilot is part of your configration, you can use an exernal Sonalert
1. At the Display Setup screen, select Sounds and tap setup.
2.
Complete the settings and tap OK.
Setting Explanation
Alarm
Off, External Speaker, AP Sonalert.
Note –
Sonalert works only with Autopilot.
Warning
Off, External Speaker, APSonalert.
Note –
Sonalert works only with Autopilot.
Track Logging Off, External Speaker
Touch Screen Both high, Off, External low
Version 9.25, Revision B FM-1000 Integrated Display User Guide 69