Coverage logging 18 Operations
View coverage layers
1.
To see different aspects (or layers) of coverage on the screen, tap on the lower left side of
the screen.
2.
Select the layer you want to view.
Layer Explanation
Overlap General coverage and overlap
Height Altitude of GPS receiver
GPS Quality Quality of GPSsignal
Cut/Fill Cut or fill (for water management operations)
Variety Different varieties being applied
Applied Rate Rate at which material is being applied
Speed Speed of the vehicle
Average Cross Track Error (XTE) Position of the vehicle in relation to the guidance line
Log coverage for varieties
By default, coverage is displayed on the screen as a pale yellow. However, if you are applying
varieties, you can set up the system to make different varieties visible on the screen.
By logging varieties, you can:
l Change product in a field, so that you can later identify which parts of the field are covered in
which product.
l Plant or apply two or more different products side by side and record the locations in your
field. For example, trackthe planting of:
ll Corn seed in the left side hoppers
l Clover seed in the right side hoppers
382 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...