Trimble FM-1000 - Distance-based pulse operation; Within range limits

18 Operations Remote Output operation
Distance-based pulse operation
With this option, pulses are output based on a specific distance you set up in Remote Output
settings (page 131). You can use distance-based pulses with straight AB or A+ lines.
Within range limits
When you use remote output with distance-based pulses and you are within the limits of the range
set in the Trigger Limits setting, your screen will show:
l The first dot for the first pulse output at the A point for the current swath
l Dots showing additional previous pulses
l
A red X indicating where the system will output the next pulse
The Remote Output panel shows:
Remote Output Panel Explanation
Next Output ID A combination of the next pulse number and the current swath ID.
Current Pass Output
The number of pulses that have been output on the current swath.
Total Outputs The number of pulses that have been output in the field currently.
Next Output Distance The distance between the implement and the next point for the
system to output a pulse.
Trigger Limits The maximum number of pulses allowed per swath past the A
point.This is set in
Remote Output settings (page 131)
. You can also
Version 9.25, Revision B FM-1000 Integrated Display User Guide 415