Trimble FM-1000 - Implement setup

Implement setup 7 Implement setup
Implement setup
Settings for an implement vary depending on the implement type and the operation it will be
performing.
Implement setup ensures the system can tell:
l Which type of implement is attached
l How much area it covers
l How far offset the implement is from the guidance line or pattern
Note – Some configuration settings are unavailable when a field is open in the Run screen. To access these
settings, return to the Run screen and then tap the Home button. When prompted to close the field, tap Close.
152 FM-1000 Integrated Display User Guide Version 9.25, Revision B