C 20 Glossary
Blade height
Current height of the blade shown as a relative height or a GPS height depending on settings
selected.
Boot depth
Depth of the boot when installing tiles or the depth of the blade when cleaning surface ditches.
Boundary
A line indicating the border surrounding a field.
C
CenterPoint™ RTK for radio
Positioning correction service for radio communication systems. Requires access to a base station
located within a eight-mile radius (approximately) from your farm. An RTK base station sends
corrections via a radio transmitter to a mobile receiver attached to your vehicle. Works well for
farms within 8 miles of an established RTK base station or base station network, without line-of-
sight obstructions such hilly terrain or an abundance of trees.
CenterPoint™ RTX™
Positioning correction service for satellite communication systems. Delivers GPS or GNSS enabled
corrections via satellite directly to your receiver. Does not require a base station or cellular data
plan. CenterPoint RTX corrections are provided on as subscription basis.
CenterPoint RTX for cellular
Positioning correction service for cellular communications. Delivers corrections via cellular network
directly to your receiver. Requires a cellular data plan.
CenterPoint™ VRS™
Virtual reference station. Positioning correction service for cellular communication systems. Enables
RTK (Real-Time Kinetic) corrections over a large geographic area where robust cellular data coverage
is available. Provides high accuracy for guidance applications throughout the whole coverage area.
Requires a cellular data plan. Uses a cellular communication modem, such as the DCM-300 or
Ag3000. Relies on CORS.
Clean grain elevator
After grain has been separated from the rest of the plant, the clean grain auger moves the grain
from the separator to the grain bin.
Client
The customer for whom the work is being done.
Composite slope
The true angle of the fall of the design. In other words, the angle of the slope when two slope angles
are combined.
Controller orientation
Correctly associate the outputs of the Autopilot controller sensors with the direction of the vehicle.
Correction age
Time since the last GPS correction was received.
516 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...