Trimble FM-1000 - Display power on;off

Display power on/off 2 Display basics
Display power on/off
Note – The display must be correctly installed before powering on. For more information, see FM-1000
Integrated Display Cabling Guide.
Power on
Briefly hold down the power button (for approximately half a second). The display turns on, and
after a pause the Home screen displays.
Power off
1.
Close all fields before you power off the system. See Close a field (page 355).
Note – If you fail to close before rebooting or shutdown, you may experience a loss of data.
2.
Either return to the Home screen and tap Shutdown, or turn off the display manually by
holding the power button down for about two seconds.
Note – Sometimes after you press the power button and tap Shutdown, the display does not
immediately turnoff. This is because the FM-1000 integrated display is saving settings. The display will
power off after all settings are saved.
26 FM-1000 Integrated Display User Guide Version 9.25, Revision B