11 ISOBUS setup Equipment setup
Equipment setup
Make sure that you have set up the Virtual Terminal and/or Task Controller before completing the
rest of this procedure.
For cabling information, see FM-1000 Integrated Display Cabling Guide.
1.
At the Home screen, tap . The Configuration screen displays.
2.
Select Virtual Terminal then tap Diagnostics. The Virtual Terminal for the equipment you have
connected displays.
For Kinze:
Type Models Set... VT TC
Planter
3110, 3140,
3200, 3500,
3600, 3660,
3700, 3800
Current Ground Speed Source
to
GPS Speed
.
x x
Population Option
to
Prescription.
x
For Kuhn:
Type Models Set... VT TC
Seed Drill
Moduliner (HR
6004 ML)
Simulated Speed
to the
speed you will drive.
x x
Spreader AXIS-H-EMC
(40.1 & 50.1)
Task Control to On.
x
GPS Control to On.
x x
Set VariSpread to On.
x
Set Change Disc Speed to On.
x
Spreader AXIS-W (40.1 &
50.1)
Manual Speed to the speed
you will drive.
x x
GPSC to On.
x
Version 9.25, Revision B FM-1000 Integrated Display User Guide 253
To Next Page
Loading...