Trimble FM-1000 - Display to USB

Transfer data 4 Data management
Category Subcategories and data
Configuration
Features:
Implements:
System Archive:
Varieties:
Vehicle Archive:
Data Dictionary Data dictionary. See
Data Dictionary categories (page 103)
.
Field Data
Data for all activities in the field. Data is structured as:
Client / Farm / Field / Event
Display to USB
CAUTION – Do not remove the USB drive from the socket while the application is copying data. This will corrupt
the data.
CAUTION – POTENTIALLOSSOFDATA!
If you copy files from:
- An to another or to an FM-1000 integrated display.
- An physical FM-1000 integrated display to another or to an FM-1000 integrated display
First make sure you have created a subfolder labeled with the display serial number for your files. Transfer your
files to this subfolder. Otherwise, you will overwrite files when you copy and you will corrupt your data.
1.
At the Data Files screen from the display's Internal Storage list, tap the item to copy. You can:
ll Select all files in the category: Select the entire category by tapping the category name.
l
Select individual files: See files within a category by tapping . The arrow changes to a
down arrow and shows the files stored under the category.Then select the file or files
you want.
l Select all files: Select Everything.
2.
Tap Copy >.The item is copied to the USB list.
88 FM-1000 Integrated Display User Guide Version 9.25, Revision B