Operations overview 18 Operations
Operations overview
The Run screen is where you perform operations. Depending on the features you are using,
additional feature buttons will display on the right-hand side of the Run screen.
When you begin operations, there are some basic steps you will always perform. If you have already
entered implement and vehicle settings:
1.
Select a vehicle and an implement. See Vehicle selection (page 355) and Implement selection
(page 354).
2.
Select or create client, farm, field and event. See Fields (page 353).
3. At the Run screen:
a.
Select or create guidance patterns and lines.
See Guidance pattern use (page 357).
b.
Optionally add field features.
See Field feature use (page 356).
4.
Optionally activate coverage logging. See Coverage logging (page 381).
5.
When you are finished, close the field. See Close a field (page 355).
Operation basics
The process of beginning operation can include:
1. Create or select a field. See Field creation / selection (page 353).
2. Select a vehicle. See Vehicle selection (page 355).
3. Select an implement. See Implement selection (page 354).
4. Load or create a guidance pattern to use. See Guidance pattern use (page 357).
5. Optionally, create field features on-screen to indicate their location in your field. See Field
feature use (page 356).
6. Optionally, activate coverage logging. See Coverage logging (page 381).
7.
Close the field when operations in that field are complete. See Close a field (page 355).
The system saves an event summary of what has been done in the field. If you want the field to
close more quickly, you can change the settings so that you do not save an event summary.
See Event summary adjustment (page 355).
Main buttons
The main buttons on the Run screen enable you to:
344 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...