About the FM-1000 integrated display 1 Introduction
About the FM-1000 integrated display
With the FM-1000™ integrated display, you can perform:
l Field definition and mapping
l Feature mapping
l Guidance to predefined field patterns
l Logging of coverage data
l Variable rate control
l Boom/Row switching
l Logging of topographic mapping data
l Output of information for analysis in office-based Geographic Information System (GIS)
software
l Seed, Liquid, Granular, and Anhydrous Ammonia control
l Seed monitoring
Optional features
The FM-1000 integrated display has a number of optional features /plugins you can install to expand
its functionality.
Most of these features require additional hardware. For installation information, see the FM-1000
Integrated Display Cabling Guide.
Note – Some configuration settings are unavailable when a field is open in the Run screen. To access these
settings, return to the Run screen and then tap the Home button. When prompted to close the field, tap Yes.
Also see Optional features/plugins (page 40), Unlock features / plugins (page 45) and Activate
features/plugins for use (page 47).
Compatibility
The following are compatible with the FM-1000 integrated display:
l Trimble Autopilot™ automated steering system
l Trimble EZ-Steer® assisted steering system
l Trimble EZ-Pilot® steering system
l Trimble TrueTracker™ implement steering system
l Trimble TrueGuide™ implement guidance system
l Trimble FieldLevel™ II
22 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...