Trimble FM-1000 - Operation settings

17 Yield Monitoring setup Operation settings
Combine settings
At the Yield Monitoring Setup screen on the Setup tab, enter information about the harvester you
are using.
Setting Explanation
Combine Make of harvester
Series
Series of combine
Yield Monitor Type
Type of Yield Monitoring:
l Trimble YM (Yield Monitoring)
l Claas
l John Deere
l Serial Data Input
Port Connection
The port on the back of the FM-1000 integrated display that
the yield monitor is connected to
Moisture Sensor
Moisture sensor you are using:
l Trimble
l Case IH
l New Holland
l AGCO
l Ag Leader
Advanced Setup
Operation settings
At the Yield Monitoring Setup screen on the Operation tab, enter information about the combine you
are using.
Note – The selections available on the Operation tab may vary depending on the yield monitoring type that
you selected.
Setting Explanation
Header Height Sensor
Enabled:The sensor is enabled.
Disabled:The sensor is disabled.
Head Logging Height The height at which yield data logging starts and stops. The Head
Version 9.25, Revision B FM-1000 Integrated Display User Guide 329