13 TrueGuide setup TrueGuide system
To achieve the highest performance from TrueGuide implement guidance, the Autopilot system on
the tractor must have a good calibration. An Autopilot system that is calibrated very aggressively
may need to be set up with a more neutral calibration when used with TrueGuide implement
guidance.
Requirements
To set up and operate, TrueGuide system must have:
l The Autopilot automated steering system installed and configured. See Autopilot system (page
166).
l Stable implements. (Implements that are unstable, such as sprayers with large flotation tires,
will cause rocking in the antenna that will be greater than the performance improvements on
the ground.)
l Both Autopilot and TrueGuide activated for use. See Activate features/plugins for use (page 47).
l An additional GPS receiver on the implement.
For cabling information, see FM-1000 Integrated Display Cabling Guide.
For operational information, see TrueGuide operation (page 426).
Version 9.25, Revision B FM-1000 Integrated Display User Guide 269
To Next Page
Loading...