Autopilot system 8 Vehicle guidance setup
Save vehicle profile
Note – From Autopilot firmware version 3.0 and later, the vehicle profile location defaults to “From
Database”.
After you configure and calibrate the Autopilot system for your vehicle, you can save that
information for later use. This can be useful if you want to adjust the settings or if you move the
display from one vehicle to another.
To save a vehicle profile:
1.
At the Home screen, tap .
2.
Select Autopilot and then tap Setup. The Vehicle Controller Setup screen displays.
3. On the Vehicle tab, tap Edit. The Edit Vehicle screen displays.
4. Tap Save Vehicle.
5. At the Save Vehicle Configuration screen, tap in the Filename entry box.
6. At the Enter Save Filename screen, enter a name for the current vehicle profile and tap OK.
7. At the Edit Vehicle screen, tap OK.
190 FM-1000 Integrated Display User Guide Version 9.25, Revision B
To Next Page
Loading...