2 Display basics Passwords
Passwords
The access and administration passwords apply to the FM-1000 integrated display.
Access password
Any Setup or Calibrate button marked with a padlock icon is protected by two passwords:
l Administration password: Your password.
l Master password: A backup password in case you lose the Administration password. If you
need the Master password, contact your local reseller.
The password screen displays the first time that you tap a Setup or Calibrate button after you turn on
the FM-1000 integrated display. Use the on-screen keyboard to enter the administration password
and then tap OK.
Note – Passwords are case sensitive.
Change administration password
Note – To change the Administration password, you need the Master password. If you do not know it,
contact your local reseller.
1. If you have not entered the password during the current session, at the Configuration screen
tap Setup or Calibrate .
2. If you have already entered the password during this session, tap button and then tap Lock
Configuration. On the Configuration screen tap Setup or Calibrate.
3. The Enter Administration Password screen displays.
4. Enter an incorrect password. The Wrong Password screen displays.
5. Tap Enter Master Password.
6. Enter the master password and then tap OK. The Change Administration Password screen
displays.
7. Enter your new administration password in both fields. The new administration password is
now active.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 39
To Next Page
Loading...