Trimble FM-1000 - Guidance pattern use

18 Operations Guidance pattern use
Guidance pattern use
Guidance patterns enable you to either:
l Manually steer on the guidance lines of the pattern using the on-screen lightbar to guide your
accuracy
l Use an automatic steering system to engage on and drive on the guidance lines of the pattern
The swath measurement is based on the implement width you are using.
Creating patterns
The guidance pattern types available in the display to create are:
l Straight swaths created using an AB line or an A+ line (see Straight guidance pattern (page 361))
l Curved pattern (page 363)
l Circular pivots. See Pivot pattern (page 367).
l Headlands. See Headland pattern (page 364).
l Free form patterns. See FreeForm pattern (page 369).
Access paths
With some guidance patterns, you can add an access path that provides a space such as for a road.
See Access paths (page 372).
Existing patterns
After you have created a guidance pattern, you can choose it from the list and:
l Load it for use. See Load a pattern (page 374).
l Shift it. See Shift a swath (page 378).
l Rename it. See Rename a swath (page 376).
l Delete it. See Delete a swath (page 377).
Version 9.25, Revision B FM-1000 Integrated Display User Guide 357