18 Operations ISOBUS operation
ll When section control is off, use the Virtual Terminal for section control.
l When section control is on, sections will automatically turn off to limit multiple pass
coverage.
Virtual Terminal operation
After you have activated Virtual Terminal, the button displays on the Run screen.
To access the Virtual Terminal screen:
l From the Diagnostics screen (under Configuration)
l
By tapping on the Run screen. (This button displays on the Run screen after you have
activated Virtual Terminal.)
Icon(s) on the left of the screen show the available ECUs. The center area and the buttons on the
right of the screen change depending on information provided by the ECU.
Note – Virtual Terminal screens and functions vary by platform. For more information, refer to the
equipment manufacturer's operating instructions.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 413
To Next Page
Loading...