Trimble FM-1000 - Modem setup

5 Connectivity settings DCM-300 Modem
l Dispatch asset tracking
l Wireless data plans (USA only)
Modem setup
Activate VRS for use. See Activate features/plugins for use (page 47).
To use VRS corrections, the GPS Setup tab must be configured with a Correction type of Trimble VRS.
Note – The display must be unlocked for RTK to use the Trimble VRS correction type.
1. At the Configuration screen, select VRS and then tap Setup. The VRS Configuration screen
displays.
2. From the Device list, select the type of modem that is connected. The default is DCM-300.
3.
Select the VRS Server Setup tab. Enter the required settings, as provided by your Trimble VRS Now
or Network RTK operator.
Setting Explanation
Server Name / Address
RTK/VRS/CORS base station broadcast name
Server Port Number Base station port number
Mount Point Base station mount point
User Name Assigned username
Password Assigned password
4.
If you are inside the USA and:
ll Subscribe to the AT&T or Verizon data plans and have a DCM-300G modem, tap OK. The
Configuration screen displays.
l Supply your own SIMcard and have a DCM-300G modem, enter the details of the
SIMcard from the card provider, then tap OK.
Note – The DCM-300C modem for Verizon does not use the SIM card setup tab.
Version 9.25, Revision B FM-1000 Integrated Display User Guide 139